Tip To Improve Your Life – How To Remove Rust From Metal In The Easiest Way Possible
In this article we are going to watch a video about homemade rust removal. The guys is going to demonstrate this hack on an old lathe part. First of all, you are going to need a plastic bucket. The list with things you need includes a car battery charger, washing soda and some scrap iron. That’s all we need in order to use this simple way to remove rust from old tools and car parts. The guy notes that it is very important that you use only plain iron for the jig – it should not be galvanized.
No stainless steel or other metals, as the gases released could be poisonous. Here is the part where you fill the bucket with water and soda. Then you have to use the car battery charger – negative to the part and Positive to the scrap iron. Here is the tricky part – you should not leave the bucket unattended. After an hour the charger from the video was smoking a bit. Another tip is that if possible work outside, as the gases might be flammable or harmful. The guy from the video was using the car charger for one hour.
After he turned it off, he used a wire brush on the parts for around five minutes.
The Key To A Profitable Dealership Is To Abandon It For Decades And Then Earn $3 Million In One Weekend
You will see and you will be definitely amazed how well this hack worked.